D-Link DVG-5112S User Manual page 23

DVG-5112S User's Manual
VoIP Calling Notification: The gateway will play a tone to notify that the call is via VoIP.
Enable Built-in Call Hold Music: The default setting is that when receiving a call hold request, the
gateway will play music on hold. Untick the check box to disable this function while necessary.
Enable P-Assert: This variable is for caller ID protection.
Privacy Type: Privacy type is used to disguise the caller ID when queried via an ITSP/Third-Party
Assertion.
Invite URL need 'user=phone': There is 'user=phone' in invite packet.
Reliability of Provisional Responses: Provide information on the progress of the request processing
if selected.
Compact Form: It decreases the size of SIP header if selected.
SIP CallerId Obtaining: Defines from which part of the SIP packet will the gateway obtain caller ID.
There are several places where you can put your caller ID.
Remote-Party-Id Display Name: It is locate at SIP→Remote-Party-ID→Before [<sip:]
Remote-Party-Id User Name: It is locate at SIP → Remote-Party-ID → After [<sip:], Before [@]
From-Header Display Name: The standard way is in SIP → Message Header → From → SIP
Display info.
Put Caller ID In URI: There is caller ID in URI if selected.
INVITE With Remote-Party-ID Header: There is Remote-Party-ID in the header if selected.
Support URI Percent-Encoding(RFC 3986): It follows RFC 3986 to encode/decode the letters of the
basic Latin alphabet, digits, and a few special characters.
Enable SIP 'Allow' Header: The system will put 'Allow' in the sip header if selected.
D-Link Systems, Inc. 23