Advertisement
Guardsman Vandal Resistant
Ceiling/Wall Fluorescent, T5 or T8, GSW Series
Specifications
Materials: Chassis Parts–Die-formed code gauge cold
rolled steel. End Caps–(Primary) 20 gauge cold rolled steel,
(Secondary) Vandal proof 18 gauge cold rolled steel.
Finish: Chassis exterior–Post painted white baked acrylic
enamel. End Caps–Post painted baked white enamel. Rust
preventative undercoating.
Refractor: Low brightness linear prismatic lens, 50% DR (impact
resistant) and 50% standard acrylic, 1/8" thickness, withstands 70
ft. lbs impact.
Electrical: Thermally protected class "P" ballast C.B.M.
approved, non PCB. If K.O. is within 3" of ballast, use wire
suitable for at least 90°.
Labels: I.B.E.W./UL and ULc listed. UL listed for damp locations
This product may have a mercury containing lamp. Manage in
accord with Disposal Laws. See: www.lamprecycle.org
Options & Accessories
Fusing: Internal fast blow fusing: Suffix: A.
Internal slow blow fusing: Suffix: C.
Radio Interference Filter: 120 or 277 volt, 50 or 60 Hz. One
per fixture standard. Suffix: R. One per ballast. Suffix: B.
Emergency Power Pack: Factory installed emergency power
pack includes charger and inverter concealed in fixture channel.
Upon loss of AC power, operates one lamp at reduced light.
T8 Suffix: E1. (consult factory for T5 option)
Stem and Canopy Sets: Suspends fixture 6", 12", 18" or 24"
from surface. Catalog Number: ASC6 CSP (6")
ASC12 CSP (12")
ASC18 CSP (18")
ASC24 CSP (24")
Mounting Methods
Threaded
End Cap
Nipple
Nut
Nut
For continuous row mounting. Required
to space fixtures evenly, allowing ends to
be removed and installed.
Job Information
Type:
Page 2 of 3
End Cap
Nut
Advertisement
