NETGEAR WNHD3004 - High Performance Wireless-N HD Home Theatre Adapter Datasheet page 3

3 D H D W I R E L E S S H O M E T H E AT E R N E T W O R K I N G K I T - W N H D B 3 0 0 4
Package Contents
• Two (2) 3DHD Wireless Home Theater Adapters
(WNHD3004)
• Two (2) Ethernet cables
• Installation guide
• Two (2) power adapters, localized to country of sale
Warranty
• NETGEAR 1-year Warranty
Standards
• 802.11a/n, 802.11i (WPA/ WPA2–PSK ), 802.11d,
802.11e (WMM), 802.11h
• IGMP snooping
• Multicast to unicast translation
Connects
to power
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
/
24 7
T E C H N I C A L
S U P P O R T*
Technology and Advanced Features
• Superior WiFi video reliability using advanced
technologies
– Transmit beamforming
– Space-time block coding (STBC)
– Channel state aware WiFi link management
using real time spectrum analysis
• Industry's highest performance
802.11a/n 5 GHz wireless capable of
carrier-grade IPTV video distribution
• Integrated DSP engine for higher layer
security acceleration
• Auto detection of access point and bridge modes
• Supports multicast point-to-multipoint
HD video streaming
• Single-touch push button with Wi-Fi Protected
Setup™ to connect additional adapters
• Wireless access control
Power Connects to any device with
on/off an Ethernet port such as
switch HDTVs, gaming consoles,
DVRs or Blu-ray players
© 2010 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, ReadySHARE, and Smart Wizard, are trademarks and/
or registered trademarks of NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are
trademarks of Apple Inc., registered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes
only and may be trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved.
This product is packaged with a limited warranty, the acceptance of which is a condition of sale. This product has been tested for quality
assurance and this product or its components may have been recycled.
*Basic technical support provided for 90 days from date of purchase.
Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput and wireless coverage will vary.
†
Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate and wireless coverage. NETGEAR makes no express or implied representations or warranties
about this product's compatibility with any future standards.
1 Works with devices supporting Wi-Fi Protected Setup
Interfaces
• LAN ports: Four (4) 10/100 Mbps auto-sensing
• Wireless: 802.11a/n 4x4 access point or bridge –
auto rate capable up to 300 Mbps
Ease of Use
• Plug and Play installation
• WPS (WiFi Protected Setup) push button
Physical Specifications
• Dimensions: 175 x 130 x 35 mm (6.9 x 5.1 x 1.4 in)
• Weight: 0.7 kg (1.54 lb)
NETGEAR Green Features
Power On/Off Button
80% Recycled Packaging
CEC (California Efficiency)
RoHS
WEEE
Energy Star Compliant Power Adapter
Connects to router/
gateway when set as
wireless access point
Push 'N' Connect
® (WPS).
D ATA S H E E T
D-WNHDB3004-1