Advertisement
I ENGLISH]
Troubleshooting
+ Before contacting a service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
the batterypackis almost
Changeto a charged
EC_
slow
discharged
one.
the batterypackis fully
Changeto a charged
EC_
fast
discharged,
battery.
the tape hasalmostreached Preparea new one.
TAPE
slow
its end,
TAPEEND
no
the tape reacheditsend
Changeto a newone.
TAPE
slow
thereis no tapeincamcorder. Inserta tape.
TAPE
slow
the tape is protected
If youwant to record,
to record,
releasethe protection.
1, Ejectthe tape.
D,EMG
2. Set to OFF.
C.EMG
slow
the camcorder has some
3, Detachthe battery.
R.EMG
mechanical f ault.
4. Reattach the battery,
L.EMG
* If repeatedcontact
localservice.
moisturecondensation
DEW
slow
has formedin the camcorder, see below.
+ If the camcorder is brought directly from a cold place to a warm place, moisture may condense
inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may
stick to the head drum and be damaged or the unit may not operate correctly.
To prevent possible damage under these circumstances, the camcorder is furnished with
moisture sensor.
+ If there is moisture inside the camcorder, "DEW" is displayed.
If this happens, none of the functions except cassette ejection will work.
Open the cassette compartment and remove the battery. Leave the camcorder
in a dry, warm room for at least two hours.
+ If the DEW protection is activated unexpectedly, see page 5.
,A
Advertisement
