Time Shifting (Pause Live Recording) - Hitachi HDR253 Instruction Manual

VOLUME CONTROL
The volume level of the sound from the receiver can
be altered with the VOL+ and VOL- keys on the
remote control handset. Pressing either key displays
a bar graph of the sound volume on the TV screen.The volume level selected will remain set, even
when the receiver is turned off and on again, until it is altered with VOL + and VOL - keys.The audio
volume adjustment for the receiver is independent of the volume control on your TV set. Be careful
that both volume controls are kept within reasonable levels so that when switching from analogue to
digital television viewing, or when first turning on your TV set, the sound level is not too high.
You can silence the sound from the receiver by pressing the MUTE key. The sound
remains muted until the MUTE key is pressed again, the VOL + or VOL- keys are
pressed. While the sound is muted in this way, the mute symbol is displayed in the top
left of the TV screen. The symbol is removed after 3 seconds, but the sound will remain
muted until the MUTE key is pressed for the second time and the mute symbol will display for 3
seconds.
PIP (PICTURE-IN-PICTURE)
Enables / disables PIP window.
PIP +: next channel in PIP
window.
PIP - : previous channel in PIP
window.
NOTE: PIP is only available when LOOP
THROUGH is connected. (Please see
page connection diagrams)
SWAP
Main window and PIP window
their places. In watching mode, this button
changes the HDMI resolution.
TIME SHIFTING (PAUSE LIVE
RECORDING)
Pause Live Recording is a feature that
enables you to pause a live broadcast if,
say the phone rings you can go back to
the same spot that you were at when you
left. The live broadcasting can be stopped
any time. Press PAUSE
suspend the broadcasting. In the INFO
banner the timeshift will comence.
duration of Timeshift can be adjusted from
Recordings in the Configuration menu
(See 5.1.RECORDINGS). In order to stop
the timeshift press PLAY, PAUSE or OK
button. The paused recording can be
watched in different speeds by means of
keys. To terminate the
Pause Live Recording press
NOTE:
You can also use the PAUSE button on the front of the unit if you wish.
change
button to
The
button.
34