Table of Contents
Advertisement
WARNING
Do not force the LCD Monitor over the maximum viewing angle settings as
stated above. In such an event, you will damage the Monitor and an Monitor
stand.
Cable Installation
Please follow these instructions to install the cables.
1.
Remove the back panel
2.
Remove the rear support panel
1-2)
3.
Place the signal cable, the DC power cable and the audio cable into correct
grooves (See Fig. 1-3).
+ 1 5
-5
+ 4 5
-45
Figure 1-1
from the rear of the monitor. (See Fig. 1-2)
from the swivel base support column. (See Fig.
20
Advertisement
Table of Contents
