Putting Batteries - Hitachi CP-RS57 User Manual – Operating Manual

Putting batteries

WARNING
directed. Improper use may result in battery explosion, cracking or leakage,
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a
battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
place.
• Do not give the battery a physical impact.
immediately.
• Obey the local laws on disposing a battery.
To use the remote control, please load the batteries. Whenever the remote control
starts to malfunction, replace the batteries. If you won't use the remote control for
an extended period, remove the batteries from the remote control and store them
in a safe place.
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Take old batteries out and/or put new batteries in.
When putting in batteries, align and insert the two AA batteries according to
their plus and minus terminals as indicated in the remote control.
Close the battery cover.
3.
Replace the battery cover in the direction of the arrow and snap it back into
place.
Always handle the batteries with care and use them only as
Preparations
7