Power On/Off; Turning On The Power - Hitachi CP-RS57 User Manual – Operating Manual

Power on/off

Turning on the power

WARNING
into the lens or vents of the projector.
NOTE • Turn the power on in right order. Please power on the projector before
the connected devices.
VIDEO RGB SEARCH
ASPECT AUTO BLANK
MAGNIFY
VOLUME
ON
MUTE
OFF
FREEZE KEYSTONE
-
ZOOM
+
POSITION MENU
ENTER
ESC RESET
1.
projector and outlet.
2. Open the lens cover, and set the power switch to the ON position.
The power indicator will light to solid orange. Then wait several seconds
because buttons may not function for these several seconds.
3. Press the STANDBY/ON button on the projector or remote control.
The projector lamp will light up and the POWER indicator will begin blinking
green. When the power is completely on, the indicator will stop blinking and
light green.
To display the picture, select an input signal according to the section "Selecting an
19)
input signal"
(
When the power is on, a strong light is emitted. Do not look
STANDBY/ON
button
.
LAMP
TEMP POWER indicator
POWER
INPUT
MENU
STANDBY/ON
POWER
(Solid orange)
POWER
(Blinking green)
POWER
(Solid green)
Power on/off
Power switch
17