Cisco 1700 Overview Manual page 5

Table 1-2 Rear-Panel Connectors (Continued)
Connector/Slot
WAN interface card slot
(WIC1)
Power socket
Use the rear-panel LEDs during router installation to confirm that you have correctly
connected all cables to the router.
Table 1-3 Rear-Panel LEDs
LED Label Color
WICØ OK Green
FDX Green
100 Green
LNK Green
WIC1 OK Green
Label/Color Description
No label Supports one Cisco WAN interface card. For detailed
information, refer to the Cisco WAN Interface Cards Hardware
Installation Guide that comes with every card.
+5, +12, -12 VDC Connects the router to the external power supply.
Description
On when a WAN interface card is correctly inserted in the card slot.
On solid—Ethernet port is operating in full-duplex mode.
Off—Ethernet port is operating in half-duplex mode.
On solid—Ethernet port is operating at 100 Mbps.
Off—Ethernet port is operating at 10 Mbps.
On when the Ethernet link is up.
On when a WAN interface card is correctly inserted in the card slot.
Rear-Panel Ports and LEDs
Cisco 1700 Router Overview 1-5