Pc Mode; Installation; Menu System In Pc Mode; Pc Picture Position Menu - Hitachi 42PD8A10 Instructions For Use Manual

PC Mode

Installation

• Power off both Computer and Display before
making any connections.
• Set your PC's resolution correctly before
connecting to the TV. See the table on page
25 for supported modes.
• Use a D-SUB cable to connect the TV's PC
input to the computer's RGB output termi-
nal.
15 Pin Mini D-Sub Connector
• Tighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).

Menu System in PC mode

Press the button. The menu will be dis-
played in the middle of the screen.

PC Picture Position Menu

By pressing / button, select the first icon.
PC Picture Position menu appears on the
screen.
PC PICTURE POSITION
Autoposition
H Position
V Position
Dot Clock
Phase
1024x768
H:48kHz V:60Hz
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
• Select Autoposition item by using
buttons.
• Press
Warning: Auto position adjustment recom-
mended to be done with the full screen im-
age for the proper adjustment.
H (Horizontal) Position
This item shifts the image horizontally to
right hand side or left hand side of the
screen.
• Select H Position item by using
ton.
• Use
V (Vertical) Position
This item shifts the image vertically towards
the top or bottom of the screen.
• Select V Position item by using
ton.
• Use
Dot Clock
Dot Clock adjustments correct interference
that appear as vertical banding in dot inten-
sive presentations like spreadsheets or
paragraphs or text in smaller fonts.
• Use
Phase
50
Depending on the resolution and scan fre-
50
quency that you input to the TV Set, you may
50
50
see a hazy or noisy picture on the screen. In
such a case you can use this item to get a
clear picture by trial and error method.
• Use

PC Picture Menu

By pressing
icon. PC Picture menu appears on the
screen.
- 16 -
or "OK" button.
/ button to adjust the value.
/ button to adjust the value.
/ button to adjust the value.
/ button to adjust the value.
/ button, select the second
/
/ but-
/ but-