Setting The Password Options - Epson Endeavor WG Setup Manual

Setting the Password Options

The SETUP program lets you set an optional password to
control who can use your system. If you do not want to set a
password for your computer, skip this section.
Once you set a password, you must enter it every time you turn
on or reset your computer. If you do not enter it correctly, you
cannot access your system.
Follow these steps to set a password:
Highlight the Password security option and press [M*l
1.
2 The default setting is Not installed. Press m or (-1 to
change the setting to Installed.
3. Now highlight the Password option and press [Encrl. The
default setting is Not set.
4.
Press [nl You see the following prompt:
Enter Power on Password
5.
Type the password you want to use. You can type up to
seven characters using the letter or number keys. For
example, you could enter the following:
123abcd
Do not use characters that require the &) key, such as %,
@, or #, in your password. The computer does not
distinguish between characters that are produced with the
The characters do not appear on the screen. (You can use
6. After you type the password, press m
2-16 Running the SETUP Program