Setting The Password (Security) Options - Epson Equity 4 Setup Manual

Setting the Password (Security) Options

The SETUP program lets you enter, change, or disable an
optional password to control who can access your system. The
following table lists the available options.
Security options
Select
Disable
Setup Access
System Access
Default setting
If you select Setup Access, you'll see the password prompt
only when you use the SETUP program. If you select system
Access, you'll see the password prompt both for the SETUP
and whenever the computer boots (loads the
program
operating system).
Follow these steps to enter a password:
1. Move your cursor to the security option.
Use [-I or [+1 to select either Setup
2
System
now contains the following prompt:
<Enter> to Set/Change Password
3 . Press@@.
4. You'll see the following prompt in a window at the center of
the screen:
Enter Password:
If
You do not want to set a password
You want to set a password to use the SETUP program
You want to set a password to use the system
(computer) including the SETUP program
The menu at the bottom of the screen
Access.
Access
Running the SETUP Program
or
2-9