Epson BrightLink 450Wi Quick Start Manual

BrightLink
the ultimate collaboration tool
son BrightLink interactive projector has been installed and the image has been adjusted by the
After the Ep
installer to fit the screen, whiteboard, or desired projection area on the wall, please follow these simple steps:
1. INSTALL the software (both Driver AND Tools) onto your PC/Mac.
Download the Epson BrightLink software at
•
Install BOTh
•
2. INSERT batteries into the projector remote control and interactive pen. Press the button on the pen
and the LED will illuminate green when the batteries are correctly installed and charged.
3. CONNECT the video cable and USB cable to your PC/Mac.
4. TURN ON the BrightLink projector using the power button on the remote control or on the projector.
5. DISPLAY AN IMAGE
On some PC's, you need to press
•
If the computer screen still does not appear on the projected image, press
•
on the remote control until the BrightLink projector displays the computer screen.
On a Mac, in most cases, your computer will recognize that it is connected to an LCD projector and
•
will begin projecting your image. If this does not happen, you need to turn on
6. LAUNCh Easy Interactive Driver (EID) on your computer.
For Windows, click
•
™
Epson BrightLink
Quick-start usEr's guidE
Easy Interactive Driver (EID) and Easy Interactive Tools (EIT).
from your computer on the projector.
Fn + F7
Start > Programs > EPSON Projector > Easy Interactive
www.Epson.com/brightlinkdownloads.
(at the same time) on your keyboard.
SOURCE SEARCh
DISPLAY MIRRORING.
Driver.