Control Panel Circuit - Epson DLQ-3000 Service Manual
24-pin dot matrix printer
Hide thumbs
Also See for DLQ-3000:
- Service manual (2 pages) ,
- Service manual (17 pages) ,
- Service manual (141 pages)
Table of Contents
Advertisement
Operating Principles
2.3.8 Control Panel Circuit
E05A89, the gate array for the control panel I/F, has the LCD driver, LED driver and panel
switch input circuit built in. The serial I/F is used for signal transmission between the control
panel and the main control board. The cover open sensor signal on the logic line is directly
sent to the main control board via the control panel board. If the printer cover is open, an
interlock switch function is activated for safety and puts the printer inactive state.
Figure 2-20. Control Panel Circuit Block Diagram
2-27
Rev. A
Advertisement
Chapters
Table of Contents
