3.2.2.3 C124 PSB/PSE Board Removal
Step 1) Remove the rear cover. (See Section 3.2.2.1.)
Step 2) Remove 2 screws (CBS, 3X6) securing the power supply board and the C124
PSB/PSE board to the shield plate.
Step 3) Disconnect all harnesses one by one from the connectors on the C124 PSB/PSE
board as taking out the C124 PSB/PSE board on the power supply frame
gradually, then remove the C124 PSB/PSE board.
Rev. A
Figure 3-7. C124 PSB/PSE Board Removal
Disassembly and Assembly
3-9