Test Mode - Sharp DV-NC70U Service Manual

DV-NC70U/C
DV-NC72U

9. TEST MODE

"NO DISC" state
F0000000 00000000
10000006 00000000
DYNAMIC TEST
"F0" Key input (Press "Play" Key and "Stop" Key for 5 seconds.)
<Press "1" Key on the remote control or "Stop" Key on the main unit.>
10000000 ~~~~~~~~
10000001 00005502
10000002 ~~~~~~~~
10000003 00000002
10000004 ~~~~~~~~ ~
10000005 ~~~~~~~~ ~~~~~~~~ Servo program version
10000006 ~~~~~~~~
Return to the initial testmode image.
<Press "4" Key of the remote control>
All FIP light up
40000000 00000000 (OSD only)
Return to the initial testmode image.
"3" Key input
"1" Key input
LASER TEST
DVD LD ON
"1" Key input
LASER TEST
CD LD ON
"1" Key input
LASER TEST
LD OFF
"1" Key input
To (1)
The preparation date
display of the program
Model number display
The version display of
the program
Region number
display
Micro-code version
display
display
Source code version
display
"Playback" Key of the remote control
is pushed for 7 times.
Press "4" Key of the remote control.
Laser test mode
The tray opens, the DVD laser is lit, spinning is performed
and the sled moves to the outer periphery.
The DVD laser goes out, the CD laser is lit, spinning is performed
and the sled moves to the outer periphery.
The DVD and CD laser go out, spinning is performed
and the sled moves to the outer periphery.
38