Test Mode - Sharp DV-NC70 Service Manual

9. TEST MODE

"NO DISC" state
"F0" Key input (Press "Play" Key and "Stop" Key for 5 seconds.)
F0000000 00000000
<Press "1" Key on the remote control or "Stop" Key on the main unit.>
<Press "4" Key of the remote control>
"3" Key input
10000006 00000000
DYNAMIC TEST
"1" Key input
LASER TEST
DVD LD ON
LASER TEST
CD LD ON
LASER TEST
LD OFF
To (1)
10000000 ~~~~~~~~
The preparation date
display of the program
10000001 00000703 Model number display
(DV-NC70/W)
10000001 00000704 Model number display
(DV-NC70X)
10000001 00000705 Model number display
(DV-NC70RU)
10000002 ~~~~~~~~
The version display of
the program
10000003 00000004 Region number
display (DV-NC70/W)
10000003 00000008 Region number
display (DV-NC70X)
10000003 00000016 Region number
display (DV-NC70RU)
10000004 ~~~~~~~~ ~
Micro-code version
display
10000005 ~~~~~~~~ ~~~~~~~~ Servo program version
display
10000006 ~~~~~~~~
Source code version
display
"Playback" Key of the remote control
is pushed for 7 times.
Return to the initial test mode image.
All FIP light up
40000000 00000000 (OSD only)
Press "4" Key of the remote control.
Return to the initial test mode image.
Laser test mode
The tray opens, the DVD laser is lit, spinning is performed
and the sled moves to the outer periphery.
"1" Key input
The DVD laser goes out, the CD laser is lit, spinning is performed
and the sled moves to the outer periphery.
"1" Key input
The DVD and CD laser go out, spinning is performed
and the sled moves to the outer periphery.
"1" Key input
37
DV-NC70/W
DV-NC70X/RU