Automatic Rinse/Self- Cleaning Cycle - Philips Intelia HD8752 User Manual

2
Press the " " button to start the cycle. The machine starts the auto-
matic priming of the circuit by letting out a pre-set quantity of water
through the Cappuccinatore.
3 The bar under the icon shows the operation progress. When the pro-
cess is completed, the machine stops dispensing automatically.
4
Then the display shows the machine warm-up icon.

Automatic rinse/self- cleaning cycle

When warm-up is completed, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
5 Place a container under the dispensing spout to catch the small
amount of water which will be dispensed.
6
The machine shows this display. Wait for the cycle to fi nish automati-
cally.
Note:
You can stop dispensing by pressing the "
7
When the above steps are completed, the machine shows this display.
ENGLISH
" button.
11 11