Table of Contents
Advertisement
General Guide
15
PC card lock button
(inside PC card slot
cover)
16
PC card eject button
(inside PC card slot
cover)
17
PC card slot cover
18
Neck strap bars
19
Charger terminals
20
Backup battery
compartment
21
Open button
22
Lithium-ion battery
pack compartment
connector
23
Initialize button
24
14-pin serial interface
connector
Note!
Pressing the Initialize button clears all data and programs from memory.
Never press the Initialize switch unless absolutely necessary.
E-18
Top
15
16
Bottom
18
Locks optional PC card in place.
Make sure that this button is in the LOCK position when using a PC
card.
Press this button (after opening the PC card slot cover and setting the
PC card lock button to FREE) to eject a PC card installed in the Data
Collector.
Insert the optional PC card here when installing.
Open when inserting a PC card.
For connection of the neck strap.
These terminals mate with the I/O box to receive electrical power for
charging the lithium-ion battery pack.
Houses the lithium-ion battery used for memory backup.
Slide to open the battery pack cover.
Houses the lithium-ion battery pack that is the Data Collector's main
power supply.
Use a paper clip or other thin, pointed object to press this button to
launch the Data Collector's system initialization routine.
For connection of future expansion options.
Back
17
20
21
22
19
23
24
Advertisement
Table of Contents
