Connecting Two Units - Casio ALGEBRA FX 2.0 PLUS Manual

10-1 Connecting Two Units

The following procedure describes how to connect two units with the connecting cable that
comes equipped as a standard accessory.
u u u u u To connect two units
1. Check to make sure that the power of both units is off.
2. Remove the covers from the connectors of the two units.
3. Connect the two units using the cable.
# Models that are supported for this configura-
tion are shown below.
ALGEBRA FX 2.0/FX 2.0 PLUS
FX 1.0/FX 1.0 PLUS
10-1-1
Connecting Two Units
Cable
# Be sure you keep the connector covers in a safe
place so you can replace them after you finish
your data communications.
# Keep the connectors covered when you are not
using them.
20011101 20011001 19990401