Washing Programmes - Zanussi ZWJ 12591 W User Manual

Delayed start
The delay set appears for a few seconds, then the display show again the duration of the set programme. The
delay time value decreases by one unit every hour and then, when 1 hour remains, every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
«What to do if...»).
Incorrect option selection
If you set an option not compatible with the set wash programmed, the display shows the message Err for a
few seconds. The light of button 7 starts flashing with red colour.
End of programme
When the programme has finished, a flashing zero (
The door can be opened.
Washing programme phase icons
When you set the wash programme, the icons corresponding to the different phases making up that pro-
4 gramme appear on the display.
After you have pressed button 7, the only running phase icon stays on. When the programme has finished, the
display shows three flashing zero (0.00).
Heating phase icon
5 During the washing cycle the display shows a temperature icon to indicate that the appliance has started the
heating phase of the water in the tub.

Washing programmes

Proportional Programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Type of Laundry
Cottons
40°
Main wash - Rinses
Spin at the maximum speed
White and fast coloured cotton (heavily or normally soiled
items).
Synthetics
40°
Main wash - Rinses
Maximum spin speed at 900 rpm
Synthetic or mixed fabrics: underwear, coloured garments, non-
shrink shirts, blouses.
) appears. The light 9 and the light of button 7 go out.
Options
SPIN REDUCTION
RINSE HOLD
1)
HEAVY / LIGHT
2)
ECONOMY
3)
PREWASH
EXTRA RINSE
SPIN REDUCTION
RINSE HOLD
1)
HEAVY / LIGHT
2)
ECONOMY
3)
PREWASH
EXTRA RINSE
(see paragraph
Detergent
Compartment
/
/
7