The Lower Basket; The Cutlery Basket; The Upper Basket - Zanussi ZDT6764 Instruction Book

Hide thumbs Also See for ZDT6764:
Table of Contents

Advertisement

Open the door and slide out the baskets to load the dishes.

The lower basket

The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can turn
freely.
UI48
The rows of prongs on the lower basket can be easily lowered
to allow you to load pots, pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down
(see picture).
- To bring them back to the standing position, just pull them up
again.
UI85

The cutlery basket

Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving knives must
be placed horizontally in the removable knife basket, which is
positioned at the rear of the upper basket.
UI53
Cutlery should be placed in the removable cutlery basket with
the handles facing downwards. If the handles protrude from
the bottom of the basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
UI21
UI18
For best results we
recommend you to use the
cutlery grids provided (if the
size and dimensions of the
cutlery allow it).
The cutlery basket is in two
parts which can be separated
to give greater loading
flexibility. To separate the two
parts, slide them horizontally
in opposite directions and
pull them apart. To
reassemble, reverse the
procedure.

The upper basket

The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses.
Arrange items on and underneath the cup racks so that water
can reach all surfaces.
For taller items, the cup racks
can be folded upwards.
Glasses with long stems can
be placed upside down in the
cup racks.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
In case that plates are loaded in the upper
basket:
load them starting from the
rear positions of the basket;
tilting them slightly forwards
and avoiding the front
positions near the door.
Before closing the door, ensure that the spray arms can
rotate freely.
28
UI63
UI62
US47
US71

Advertisement

Table of Contents
loading

Table of Contents