Right Side Of The Chassis; Disassembling The Right Side Of The Chassis - Brother LX-200 Service Manual

3.15 Right Side of the Chassis

3.15.1

Disassembling the Right Side of the Chassis

1. Remove the leaf switch Y screw. Remove the leaf switch Y assy.
2. Release the Y-sensor lever hook and remove the Y-sensor lever.
3. Incline the edging saddle EDS-1 and remove it.
4. Release roller guide R from the boss hole. Incline the guide and remove it.
5. Remove the TY-planet gear holder, before removing the felt, TY-idle gear, and TY-
spring washer from the shaft. Take care not to damage the TY-planet gear holder
hooks by opening too far.
6. Remove the TY-planet gear from the TY-planet gear holder.
Y-sensor lever hook
Roller guide R
Y-sensor lever
TY-spring washer
Fig. 3.15-1 Disassembling the Right Side of the Chassis (1)
3-36
Edging saddle EDS-1
TY-planet gear
Leaf switch Y screw
Leaf switch Y assy
TY-idle gear
Felt
TY-planet gear holder