Wiremarking Labels; Serializing Labels (Simple) - Brady LabelMark 3.2 User Manual

LabelMark User Guide

WireMarking Labels

When you WireMark a label(s), text copies down the label as many times as it will fit.
To create WireMarked labels:
1. Enter text on the label(s).
2. Select the label(s) you want to WireMark (see Selecting Text and Labels)
3. Click the WireMark icon
Note: You can also click the WireMark icon before typing text on the label or select Wiremark
under the Formatting tab in the User Defaults section (Tools
wiremarking for all labels by default.
To remove WireMarking from labels:
•
Select the label(s).
•
Click the WireMark icon
Additional WireMarking notes:
•
You can WireMark multiple lines of text.
•
The gray hatch marks represent a partial line(s) of text – you are not allowed to place anything in
this area and it will not print.
•
You can modify a WireMarked label by changing its text.
•
Users commonly bottom align WireMarked labels.
•
WireMarking creates a text block in LabelMark Plus; however, you cannot place any other objects
on the label.
•
When using LabelMark Plus, you must turn off wiremarking for any individual label you wish to
add non-text objects to.

Serializing Labels (Simple)

The serialization feature automatically generates serial data based on the values entered in the Serialization
Attributes dialog. The process described below is for simple serialization. For more complex serialization
options, see Serializing Labels (Advanced).
To access the simple serialization feature:
1. Click the desired location on the label to place the serialization information.
LabelMark Plus Note: In LabelMark Plus, select the Text icon
clicking the desired location.
28
on the Action toolbar.
again.
User Defaults...) to turn on
or Barcode icon before
Basic LabelMark Techniques