Displaying Qos Information; Qos Configuration Examples - Cisco WS-C3550-12G Software Configuration Manual

Multilayer switch
Hide thumbs Also See for WS-C3550-12G:
Table of Contents

Advertisement

Displaying QoS Information

Displaying QoS Information
To display the current QoS information, use one or more of the privileged EXEC commands in
Table
Table 20-6 Commands for Displaying QoS Information
Command
show class-map [class-map-name]
show policy-map [policy-map-name [class class-name] |
[interface interface-id]
show mls qos aggregate-policer
[aggregate-policer-name]
show mls qos maps [cos-dscp | dscp-cos | dscp-mutation
| ip-prec-dscp | policed-dscp]
show mls qos interface [interface-id] [buffers | policers |
queueing | statistics]
1. You can define up to 16 DSCP values for which byte or packet statistics are gathered by hardware by using the mls qos monitor {bytes | dscp dscp1 ...
dscp8 | packets} interface configuration command and the show mls qos interface statistics privileged EXEC command.

QoS Configuration Examples

This section provides a QoS migration path to help you quickly implement QoS features based on your
existing network and planned changes to your network, as shown in
information:
Catalyst 3550 Multilayer Switch Software Configuration Guide
20-56
20-6:
QoS Configuration for the Common Wiring Closet, page 20-57
QoS Configuration for the Intelligent Wiring Closet, page 20-58
QoS Configuration for the Distribution Layer, page 20-59
Purpose
Display QoS class maps, which define the match criteria to
classify traffic.
Display QoS policy maps, which define classification criteria for
incoming traffic.
Display the aggregate policer configuration.
Display QoS mapping information. Maps are used to generate an
internal DSCP value, which represents the priority of the traffic.
Display QoS information at the interface level, including the
configuration of the egress queues and the CoS-to-egress-queue
map, which interfaces have configured policers, and ingress and
egress statistics (including the number of bytes dropped).
Chapter 20
Configuring QoS
Figure
20-10. It contains this
78-11194-03
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3550

Table of Contents