Firewall > Internet Access Policy - Cisco RVS4000 - Gigabit Security Router User Manual

Chapter 5
Time To make the rule apply for an entire day, select
24 Hours. To make the rule apply only during a specific
period of the day, enter the starting time in the From field
and the ending time in the To field.
Click Save Settings to save your settings. Click Cancel
Changes to cancel your changes. Click Return to return
to the IP-Based ACL screen.
Firewall > Internet Access Policy
Firewall > Internet Access Policy
Access can be managed by a policy. Use the settings
on this screen to establish an access policy. Selecting a
policy from the drop-down menu will display that policy's
settings. You can then perform the following operations:
• Create a Policy—see instructions below.
• Delete the current policy—click
Summary to display the Internet
• View all policies—click
Policy Summary popup which lists all of the Internet
access policies and includes the following information:
No., Policy Name, Days, Time, and a checkbox to delete
(clear) the policy. To delete a policy, check the checkbox
in the Delete column, and click Delete.
• View or change the PCs covered by the current policy—
click Edit List of PCs to display the List of PCs popup.
4-Port Gigabit Security Router with VPN
Delete.
Setting Up and Configuring the Router
Internet Policy Summary
List of PCs
On the List of PCs popup, you can define PCs by MAC
Address or IP Address. You can also enter a range of IP
Addresses if you want this policy to affect a group of PCs.
To create an Internet Access policy:
1. Select the desired policy number from the
Access Policy drop-down menu.
2. Enter a Policy Name in the field provided.
3. To enable this policy, set the
Edit List of PCs to select which PCs will be affected
4. Click
by the policy. The List of PCs popup will appear. You can
select a PC by MAC Address or IP Address. You can also
enter a range of IP Addresses if you want this policy to
affect a group of PCs. After making your changes, click
Save Settings to apply your changes.
5. Click the appropriate option,
on whether you want to block or allow Internet access
for the PCs you listed on the List of PCs popup.
6. Decide which Days and what Times you want this
Internet
Status option to Enable.
Deny or Allow, depending
17