Auto Mode/Hybrid Auto Mode; Other Shooting; Sending Images - Canon PowerShot SX280 HS User Manual

Powershot sx280 hs
Table of Contents

Advertisement

Sending Images

Send images wirelessly to destinations registered on the camera as follows.
Images can be uploaded to social networking services or sent to email
addresses, via CANON iMAGE GATEWAY. For details, refer to the CANON
iMAGE GATEWAY website.
Up to 50 images can be sent together at once. Only one movie can be sent.
However, if the destination is a Web service, the number of movies and
images that can be sent may be less depending on the Web service. See the
desired Web service for details.
Movies that can be sent have a maximum time of two minutes (excluding
digest movies).
Depending on the condition of the network you are using, it may take a long
time to send movies. Be sure to keep an eye on the camera battery level.
When connected to a computer, images are transferred using the computer
(software CameraWindow) instead of the camera
Sending Images Individually
1
Choose an image.
z
z
Turn the <5> dial to choose an image
to send.
(=
138).
2
Send the image.
z
z
Press the <q><r> buttons to choose
[Send this image], and then press the
<m> button.
z
z
When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <m> button.
X
X
Image transfer will begin. The screen
darkens during image transfer.
X
X
After images are uploaded to a Web
service, [OK] is displayed. Press the
<m> button to return to the playback
screen.
X
X
After sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
For digest movies, a separate, compressed file is sent instead of
the original file. Note that this may delay transmission, and the file
cannot be sent unless there is enough space for it on the memory
card.
Keep your fingers or other objects off the Wi-Fi transmitter-receiver (=
Covering this may decrease the speed of your image transfers.
On the screen, wireless signal strength is indicated by the following icons.
[
] high, [
] medium, [ ] low, [ ] weak
However, no icon is displayed when the camera is used as an access point.
To disconnect from the camera, press the <n> button, and after the
confirmation message, choose [OK] (either press the <q><r> buttons or turn
the <5> dial) and press the <m> button. You can also use the smartphone
to end the connection.
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Using GPS
Function
3
Auto Mode/
Hybrid Auto Mode
4

Other Shooting

Modes
5
P Mode
6
Tv, Av, and M
Mode
7
Playback Mode
8
Wi-Fi Functions
9
Setting Menu
4).
10
Accessories
11
Appendix
Index
141

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powershop sx270 hsPowershot sx270 hs

Table of Contents