Table of Contents
Advertisement
Chapter 12
Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
Command
Step 3
dot11 ids mfp detector
Step 4
sntp server server IP address
Step 5
end
Step 6
copy running-config
startup-config
Beginning in privileged EXEC mode, follow these steps to configure the WDS:
Command
Step 1
configure terminal
Step 2
dot11 ids mfp distributor
Step 3
end
Step 4
copy running-config
startup-config
OL-14209-01
Description
Configures the access point as an MFP detector. When enabled,
the access point validates management frames it receives from
other access points. If it receives any frame that does not contain
a valid, and expected, MIC IE, it will report the discrepancy to the
WDS. The access point must be a member of a WDS.
Enter the name or ip address of the SNTP server.
Return to the privileged EXEC mode.
(Optional) Save your entries in the configuration file.
Description
Enter global configuration mode.
Configures the WDS as an MFP distributor. When enabled, the
WDS manages signature keys, used to create the MIC IEs, and
securely transfers them between generators and detectors.
Return to the privileged EXEC mode.
(Optional) Save your entries in the configuration file.
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
Management Frame Protection
12-27
- Quick Links:
- Repeater Access Point
Hide quick links:
Advertisement
Table of Contents
