Linksys WVC54GCA-RM - Wireless-G Internet Home Monitoring Camera Network Quick Installation Manual page 6

WPA/WPA2-Personal
passphrase in the Passphrase field
and click Next. The passphrase is
case-sensitive and must be from 8 to
63 characters in length.
WEP (64-Bit) or WEP (128-
Bit)
To generate the WEP key
automatically, enter a passphrase in
the Passphrase field and click Next.
The passphrase is case-sensitive
and should not be longer than
16 characters. It must match the
passphrase of your other wireless
network devices and is compatible
with Linksys wireless products
only. (If you have any non-Linksys
wireless products, enter the WEP
key manually on those products.)
To manually enter a WEP key, leave the Passphrase field blank, click
Next, and enter the WEP key on the next screen. This WEP key
must match the WEP key of your wireless network. For 64-bit WEP
encryption, enter exactly 10 hexadecimal characters. For 128-bit
WEP encryption, enter exactly 26 hexadecimal characters. Valid
hexadecimal characters are "0" to "9" and "A" to "F". After you have
entered the WEP key, click Next.
O.
Review the Camera's settings. To
make changes to the settings, click
Back to go back to the previous
screen. If the settings are correct,
click Save to continue.
Enter a
WPA/WPA2-Personal WPA/WPA2-Personal
WEP (64-Bit or 128-Bit) WEP (64-Bit or 128-Bit)