Linksys WVC54GCA-RM - Wireless-G Internet Home Monitoring Camera Network Quick Installation Manual page 5

Set IP address configuration
manually
want to manually assign a static IP
address to the Camera. If you select
this option, fill in the IP Address,
Subnet Mask, and Gateway fields.
L.
If you want to keep the Camera's
default password (admin), leave
the fields unchanged and click
Next. If you want to change the
password, enter the new password,
re-enter to confirm, then click Next.
M.
The Wizard will search for wireless
networks, then list the wireless
networks found. If the wireless
network you want to connect to is
not listed, click Refresh to update
the list. Select the wireless network
that you want to connect the
Camera to, then click Next.
N.
The Wizard displays the wireless security method that your network is
using: WPA/WPA2-Personal, WEP (128-Bit), or WEP (64-Bit). Follow the
appropriate instructions below. If you are not using wireless security, select
Disabled and go to step O.
Select this option if you
Enter the Static IP Address Enter the Static IP Address