Honda Accord Owner's Manual page 86

Main Menu
3. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
4. Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.
Table Of Contents
To program the Drive Lock mode:
Locks both doors when the vehicle's
speed reaches about 9 mph (15 km/h).
1. Make sure the shift lever is in the
Park (P) position (A/T vehicles).
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3.
On A/T vehicles,
brake pedal, and move the shift
lever out of the Park (P) position.
2008 Accord Coupe
4. Push and hold the front of the
master door lock switch on the
driver's door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
5. Release the switch, and within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
On A/T vehicles,
lever to the Park (P) position.
6. Turn the ignition switch to the
LOCK (0) position.
push and hold the
Door Locks
move the shift
83