D-Link DWS-4026 User Manual page 546

D-Link Unified Access System
5 Enter 20 in the VLAN ID field, and then click Create.
6 Go to the LAN > L2 Features > Monitoring > VLAN Summary > VLAN Port Status page to view the logical interface
IDs assigned to the VLAN routing interfaces.
VLAN 10 is assigned ID 4/1 and VLAN 20 is assigned ID 4/2
7 To enable routing on the switch, go to the LAN > L3 Features > IP > Configuration page, select Enable from the Routing
Mode menu, and click Submit.
8 Go to the LAN > L3 Features > IP > Interface Configuration page to configure the IP addresses and subnet masks for
the virtual router ports.
a. From the Unit/Slot/Port menu, select 4/1.
b. Enter 192.150.3.1 in the IP Address field.
c. Enter 255.255.255.0 in the Subnet Mask field.
d. Click Submit.
Page 546 Configuring VLAN Routing
Software User Manual
Document 34CSFP6XXUWS-SWUM100-D7
12/10/09