Figure 362: Qos Configuration; Table 337: Qos Settings - D-Link DWS-4026 User Manual

Software User Manual
12/10/09
Configuring Quality of Service (QoS) on the D-Link Unified Switch consists of setting parameters on existing queues for
different types of wireless traffic, and effectively specifying minimum and maximum wait times (through Contention Windows)
for transmission. The settings described here apply to data transmission behavior on the access point only, not to that of the
client stations.
AP Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the access point to the client
station. Station Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the client station to the
access point.
Table 337 describes the QoS settings you can configure.
Field
Document 34CSFP6XXUWS-SWUM100-D7

Figure 362: QoS Configuration

Table 337: QoS Settings

Description
AP EDCA Parameters
D-Link Unified Access System
Configuring Advanced Settings Page 519