Show Install Committed Command - Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual
Ios xr troubleshooting guide
Hide thumbs
Also See for CRS-1 - Carrier Routing System Router:
- Administration manual (436 pages) ,
- Getting started manual (289 pages) ,
- Migration manual (250 pages)
Table of Contents
Advertisement
Chapter 1
General Troubleshooting
Node 0/6/CPU0 [LC] [SDR: Owner]
Node 0/RP0/CPU0 [RP] [SDR: Owner]
Node 0/RP1/CPU0 [RP] [SDR: Owner]
Node 0/SM0/SP [SP] [SDR: Owner]
Node 0/SM1/SP [SP] [SDR: Owner]
Node 0/SM2/SP [SP] [SDR: Owner]
Node 0/SM3/SP [SP] [SDR: Owner]
The active packages for each node are on disk0, and for all nodes, the composite package
hfr-os-mbi-3.3.0 is active. Additional packages shown are optional packages that have been activated
after the initial loading of the Cisco IOS XR Unicast Routing Core Bundle.
show install committed Command
Use the show install committed command to display committed software packages. The committed
software packages are the software packages that will be booted on a router reload.
Committed packages are the packages that are persistent across router reloads. If you install and activate
a package, it remains active until the next router reload. If you commit a package set, all packages in that
set remain active across router reloads until the package set is replaced with another committed package
OL-21483-02
disk0:comp-hfr-mini-3.3.0
Boot Image: /disk0/hfr-os-mbi-3.3.0/lc/mbihfr-lc.vm
Active Packages:
disk0:hfr-diags-3.3.0
disk0:comp-hfr-mini-3.3.0
Boot Image: /disk0/hfr-os-mbi-3.3.0/mbihfr-rp.vm
Active Packages:
disk0:hfr-diags-3.3.0
disk0:hfr-mgbl-3.3.0
disk0:hfr-k9sec-3.3.0
disk0:comp-hfr-mini-3.3.0
Boot Image: /disk0/hfr-os-mbi-3.3.0/mbihfr-rp.vm
Active Packages:
disk0:hfr-diags-3.3.0
disk0:hfr-mgbl-3.3.0
disk0:hfr-k9sec-3.3.0
disk0:comp-hfr-mini-3.3.0
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Active Packages:
disk0:hfr-diags-3.3.0
disk0:comp-hfr-mini-3.3.0
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Active Packages:
disk0:hfr-diags-3.3.0
disk0:comp-hfr-mini-3.3.0
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Active Packages:
disk0:hfr-diags-3.3.0
disk0:comp-hfr-mini-3.3.0
Boot Image: /disk0/hfr-os-mbi-3.3.0/sp/mbihfr-sp.vm
Active Packages:
disk0:hfr-diags-3.3.0
disk0:comp-hfr-mini-3.3.0
Validating and Troubleshooting Cisco IOS XR Software Package Installation
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
1-33
Advertisement
Table of Contents
Troubleshooting
