Baumatic BR26A Instruction Manual page 29

Should the seal not adhere to the casings of the appliance correctly,
it will have to be heated from a suitable distance using a hair dryer
and lightly stretched in order to attain the required dimensions.
NOTE FOR AFTER REVERSING THE DOOR
After you have reversed the door, check that the
magnetic gasket seals correctly. It must NOT be
creased or crushed so that there is a gap between it
and the inside of the door. It must also seal all
around the door.
In case the seal does not fit perfectly, pull it out and
rotate it by 180 degrees.
Should the seal not adhere to the casings of the
appliance correctly, it will have to be heated from a
suitable distance using a hair dryer and lightly
stretched in order to attain the required dimensions.
28