Apm Configuration - Asus P5VD1-X User Manual

4.5.4 APM Configuration
Power Management/APM
Power Button Mode
Restore on AC Power Loss
Advanced Resume Events Controls
Resume On Ring
Resume On PME#
Resume On KB
Wakeup Key
Resume On By PS/2 Mouse
Resume On RTC Alarm
Power Management/APM [Enabled]
Allows you to enable or disable the Power Management/APM function.
Configuration options: [Disabled] [Enabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the power button
is pressed. Configuration options: [On/Off] [Standby] [Suspend]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss. When
set to Power On, the system goes on after an AC power loss. When set to Last State,
the system goes into either off or on state, whatever the system state was before the
AC power loss. Configuration options: [Power Off] [Power On] [Last State]
Resume On Ring [Disabled]
Configuration options: [Disabled] [Enabled]
Resume On PME# [Disabled]
Configuration options: [Disabled] [Enabled]
Resume On KB [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Wake-Up Key [Any Key]
Allows you to use any key to generate a wake event.
Resume On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item
is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm
Minute, and RTC Alarm Second appear with set values. Configuration options:
[Disabled] [Enabled]
4-26
[Enabled]
[On/Off]
[Last State]
[Disabled]
[Disabled]
[Disabled]
[Any Key]
[Disabled]
[Disabled]
Select Disable Or
Enable APM.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS Setup