Electrical Connections - AEG AT 143 U Operating Instructions Manual

Installing and Connecting

Electrical connections

· WARNING! THIS APPLIANCE MUST BE EARTHED.
1
The manufacturer declines any liability should this safety
measure not be observed.
• If the plug that is fitted to your appliance is not suitable for your socket outlet,
it must be cut off and the appropriate plug fitted.
• Remove the fuse from the cut off plug. The cut off plug should then be
disposed of to prevent the hazard of shocks in case it should be plugged into a
13 Amp socket in another part of your home.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
If you fit your own plug, the colours of the wires in the mains lead of your
appliance may not correspond with the markings identifying the terminals in your
plug, proceed as follows:
• Connect the green and yellow (earth) wire to the terminal in the plug which is
marked with the letter "E" or the earth symbol (
yellow.
• Connect the blue
(neutral) wire to the
terminal in
the plug which is
marked with the letter
"N" or coloured black.
• Connect the brown
(live) wire to the
terminal in the plug
which is marked with
the letter "L" or
coloured red.
12
GREEN AND YELLOW
BLUE
BROWN
EARTH
NEUTRAL
LIVE
GREEN & YELLOW
BLUE
) or coloured green and
13 AMP FUSE
BROWN
CORD CLAMP