Stopping A Backup Or Recovery In Progress - Acer Altos EasyStore User Manual

Chapter 5

Stopping a backup or recovery in progress

117
Once a backup or recovery starts, you can stop it at any time—for example, if you
notice that your system is not responding as quickly as you'd like, and you want to
free up processing capabilities for other tasks.
When you stop a backup in progress, that backup won't appear in the list of
backups on the Restore page, and any changed data that was not copied to the
storage system will be copied during the next backup.
When you stop a recovery in progress, the local disk or partition is left in an
incomplete state, and you must recover it again later before you can use it.
To stop a backup or recovery in progress:
1. Click Status.
2. In the Protected disk list, select the disk whose backup or recovery you want to
stop.
3. Click Stop Current Activity.
If you're stopping a backup, the backup stops immediately.
If you're stopping a recovery, a confirmation message displays. Click OK to stop
the recovery now, or click Cancel to proceed with it.
Protecting Local Disks
Altos easyStore Manual