Sewing Operation; Before Starting Sewing; Starting Sewing Operation - Brother BE-1204B Instruction Manual

Sewing Operation

Before Starting Sewing

Select a hoop to set on the machine.
! The following operation should be done before turning the power ON to the machine. Otherwise, it
will damage the hoop.
1. Select either the flat hoop or cap hoop, using FLAT or CAP switch on the operation panel.
When a flat or tabular hoop, or a sash frame is set on the machine, select [FLAT].
When a cap hoop is set, select [CAP].
2. Specify an embroidery hoop set on the machine, referring to "Embroidery Hoop" (→ Page 5-9).

Starting Sewing Operation

! For details of specifying a sewing start position, refer to "Registration of Sewing Start Position" (→
Page 5-18).
! When is pressed while the message "Area over" is indicated on the screen, a dialog box is
displayed for confirming whether or not to start sewing forcibly.
however, depending on the start position, an interference with the frame may occur.
added care when doing so.
1. Check that sewing data has been selected, then press
Sewing is started.
The current embroidering status is indicated.
Currently selected speed range
The range can be modified by pressing
Indicates a sequence of color changes.
No. of current stitches
Indicates a name of data currently used for sewing.
Indicates the number of data currently used for sewing.
BE-1204B-BC • BE-1206B-BC
Chapter 3 Selection of Data and Embroidering
W0438Q
Pressing
.
.
starts sewing;
Exercise
W0439Q
3-17