Usercodes - Honeywell XL4600SM Owner's Manual

USERCODES
ADDORCHANGE AUSERCODE
Users csn be added or changed directly at the keypad. Your system can have up
to 15 different user codes. Users #1 and #2 are the only users allowed to add or
delete other users.
Press the Code button followed by user #1 or user #2 ~digit user code, then the
new user's user number and the new 4-digit user code. The keypad will beep
after each dgit is pressed.
User #1 or #2 Ctie User ID New User Code
=1 UUU nn nnnn
Use the system reference sheet to record system users. On this sheet your
installer will indicate if you heve chosen to dedicate a user code to send an
emergency signal in the case of Ambush or Duress, You may also have chosen
to resewe one user code that is only allowed to turn the system on. This code
will not be able to turn the system off.
DELETE A USER CODE
To delete a user, press the Code button followed by the 4-digit master user code,
then the user number, then press [#] to delete. For example, to delete user 3, do
the following
Master User C@e User 10 #to delete
NOTE: User #1, the master usar, cannot be deleted but it can be changed using
the ADD OR CHANGE user procedure.
TURN SYSTEM ON ONLY (Maid Code)
If you choose to have a code thet cannot turn the system off, but can turn the
system on, have your installer program this festure. If programmed, user code
14 will have System On capabihty only, and you can issue this code to a
temporary ueer ao they can secure the premises when they leave.
Page 11