Replacing The Keyboard And Mouse (Only Some Models Are Equipped With Wired Keyboard And Mouse) - Lenovo 30113RU - IdeaCentre A600 - 3011 Hardware Maintenance Manual

Replacing the keyboard and Mouse
are equipped with wired Keyboard and Mouse).
22. Place the LCD panel frame assembly on the base stand, aligning the
screw holes on the frame assembly with the mounting holes on the
base stand.
23. Screw back the seven screws on the LCD panel frame assembly.
24. Close the system bay.
25. Refer to "Completing the installation".
To replace the keyboard and mouse:
1. Before removing any media (diskettes, CDs, or memory cards) from
the drives, shut down your operating system, and turn off all attached
devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard and mouse. Refer to "Left and
right view of the computer" and "Rear view of the computer".
Note
Your keyboard and mouse might be connected to the USB connector
at either the side or rear of the computer.
4. Disconnect the failing keyboard or mouse cable from the computer
and connect the new keyboard or Mouse cable to the same connector.
5. Refer to the "Completing the installation".
Chapter 7. Replacing hardware
(Only some models
81