Replacing The Mxm Heat Sink - Lenovo 30113RU - IdeaCentre A600 - 3011 Hardware Maintenance Manual

Hardware Maintenance Manual

Replacing the MXM heat sink

50
6. Align then insert the new wireless card to the wireless card connector.
7. Screw back the two screws on the wireless card.
8. Connect the black, gray, and white antenna cables to the wireless card.
9. Close the system bay.
10. Refer to "Completing the installation".
WARNING
The heat sink becomes very hot when the system is on. Never touch
the heat sink with any metal or with your hands.
To replace the MXM heat sink
1. Remove the computer cover. Refer to "Removing the computer cover".
2. Open the system bay. Refer to step 2 of the "Replacing the hard disk
drive" section.
3. Loosen the four screws (1 to 4) that secure the MXM heat sink to the
chassis.