Installing The Vesa Mount Bracket; Removing The Converter Board - Dell External XL 9010 Owner's Manual

Installing the VESA Mount Bracket

1. Align and place the bracket on the back of the computer.
2. Tighten the screws to secure the VESA mount bracket to the computer.
3. Install the:
a) back cover
b) VESA stand
4. Follow the procedures in

Removing the Converter Board

1. Follow the procedures in
2. Remove the:
a) VESA stand
b) back cover
3. Disconnect the backlight and converter cables from the converter board. Remove the screws that secure the
converter board to the computer. Lift the convertor board away from the computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
13