Installing The Vesa Stand; Removing The Back Cover - Dell External XL 9010 Owner's Manual

5. Remove the screws that secure the VESA stand to the computer and lift the VESA stand away from the computer.

Installing the VESA Stand

1. Align and place the VESA stand on the back of the computer.
2. Tighten the screws to secure the VESA stand to the computer.
3. Place and press the VESA cover on the computer, till it clicks into place.
4. Follow the procedures in

Removing the Back Cover

1. Follow the procedures in
2. Remove the VESA stand.
3. Remove the screws from the base of the computer.
10
After Working Inside Your Computer .
Before Working Inside Your Computer .