HP StorageWorks 2/32 - SAN Switch Release Note page 38

Fabric OS Commands
Example
To display the error log with page breaks:
See Also
errDump, errSaveLvlSet, errSaveLvlShow, errNvLogSizeSet, errNvLogSizeShow
errClear Command
New operands have been added to this command.
Short Description: Clear the switch error log.
Syntax
Availability
Description
Use this command to clear the error log for a particular switch instance.
If no operand is specified, this command clears the error log in RAM;
The persistent error log is not cleared. However, if -p option is specified, ONLY
the persistent error log is cleared and the error log in RAM is not cleared.
When this command is executed from the Standby CP, the switch instance number
operand is required. The switch instance number is supplied by specifying the
<-s swinst> operand. This operand is not required when logged into the
Active CP.
Operands
This command has the following operands:
s swinst - This is an optional parameter to specify a switch instance number.
38
switch:admin> errShow
Error 14
0x304 (fabos): Jun 14 11:57:52
Switch: 0, Warning FW-STATUS_SWITCH, 3, Switch status changed
from
HEALTHY/OK to Marginal/Warning
Type <CR> to continue, Q<CR> to stop:
errClear [-s swinst] [-p]
admin
SAN switch 2/32 Version 4.0.2b Release Notes