Program Digital Display - Tiered Rate Billing - Black & Decker EM100B Instruction Manual

90539499 01 EM100B.qxd 7/7/08
08 PROGRAM DIGITAL DISPLAY –
TIERED RATE BILLING
Note: Before you begin programming your Digital Display for Tiered Rate Billing,
you will need to refer to the Billing Rates and Thresholds you recorded in section 05.
S T E P A C T I O N / P R E S S
Enter Billing Rate for Tier 1.
To make the numbers change
faster, you can press and hold
the or .
Enter Threshold 1.
Enter Billing Rate for Tier 2.
Enter Threshold 2.
If there is a Tier 3,
enter Billing Rate for Tier 3.
C o n t i nue on the top of the next page.
30
10:05 AM Page 30
D I S P L AY
08 PROGRAM DIGITAL DISPLAY –
TIERED RATE BILLING
Note: Before you begin programming your Digital Display for Tiered Rate Billing,
you will need to refer to the Billing Rates and Thresholds you recorded in section 05.
S T E P A C T I O N / P R E S S
If there is no Tier 3,
Press until you see dashes.
If you have additional tiers and
thresholds, continue to enter
Billing Rates for each tier and
enter each threshold.
Programming is complete!
Go to Section 10, Using Yo u r
Power Monito r.
D I S P L AY
31