Advertisement
Microsoft Windows 95
SR2.5
Connecting to a
Windows NT 4.0 Server
2 Installing the D-Link DFE-500TX ProFAST 10/100 PCI Ethernet Adapter
Microsoft Windows 95 SR2.5
2 Installing the D-Link DFE-500TX ProFAST 10/100 PCI
Ethernet Adapter
Requirements
• HP Vectra with Windows 95 SR2.5.
• D-Link DFE-500TX ProFAST 10/100 PCI Ethernet adapter and driver
disk version 971201.
• Driver: DLKPCI.SYS, version 4.22.1
• Microsoft Windows 95 SR2.5 media.
• Microsoft Windows NT Server 4.0 system that supports NetBEUI, NWLink
IPX/SPX, and NWLink NetBIOS network protocols.
Device Configuration
Device Configuration
Interrupt
I/O Address
Procedure
1 With the HP Vectra turned off, install the D-Link DFE-500TX network
adapter into a PCI slot.
2 Connect network cable media to the D-Link DFE-500TX network adapter.
3 Power on the system and press "SHIFT-<F5>" to boot to Windows 95
Command prompt.
4 Insert the D-Link DFE-500TX driver disk and execute "A:\PUTINF
C:\WINDOWS" (where "C:\WINDOWS" is the path to your Win95
installation directory).
5 Press any key to continue the operation.
6 Upon completion, remove the D-Link DFE-500TX driver disk and reboot
the machine to Windows 95SR2.5.
7 Upon rebooting, Windows 95 will recognize a "D-Link DFE-500TX PCI
Fast Ethernet Adapter (Rev B/C)". Insert the D-Link DFE-500TX driver
disk and click on "OK".
Vectra Vli8
11
03
1400
DC00
Vectra VEi7
Vectra VEi8
11
E400
Advertisement
