About The Device Setup; For Windows Users - Yamaha QY100 Data Filer Installation Manual

This procedure lets you select the required MIDI driver that is
necessary in order for the QY100 Data Filer to exchange MIDI data (Bulk
Dump) between the QY100 and the computer.
Z Select "Device Setup" from the "Setup" Menu.
The "MIDI Port Setup" dialog box is displayed.
X Select the MIDI Driver.
Click on each of the " " buttons for the "MIDI IN Port" or
"MIDI OUT Port", select the MIDI driver from the drop-down list
that is displayed.
• If the QY100's TO HOST connector is connected directly to
the computer's serial port.
Select the "YAMAHA CBX Driver" for the "MIDI IN Port", and
the "YAMAHA CBX A Driver" for the "MIDI OUT Port".
• If the QY100's MIDI ports are connected to the computer
via a MIDI interface.
For both the "MIDI IN Port" and "MIDI OUT Port", select the
MIDI driver that is compatible with the MIDI interface you are
using.
C Click "OK".
NOTE
• To select the MIDI driver, the required MIDI driver needs be previously installed.
How to start the QY100 Data Filer

About the Device Setup

For Windows Users

13