Hardware Monitor - Asus M2N-VM SE User Manual

2.5.4. Hardware.Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Q-Fan Controller
CPU Target Temperature
System Target Temperature
CPU Temperature
System Temperature
CPU Fan Speed
Chassis Fan Speed
Power Fan Speed
Vcore
Vcc 12V
Vcc 3.3V
Vxx 5.0V
CPU Fan Type
CPU Fan Speed warning
↑↓ : Select Item
F1:Help
→←: Select Menu
ESC: Exit
Q-Fan.Controller.[Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
CPU.Target.Temperature,.System.Target.Temperature
Allows you to set the CPU and system target temperature. Key in to input the
value, then press <Enter>.
CPU Temperature, System Temperature
The onboard hardware monitor automatically detects and displays the motherboard
and CPU temperatures. These items are not user-configurable.
CPU.Fan.Speed.[xxxxRPM].
Chassis.Fan.Speed.[xxxxRPM].
Power.Fan.Speed.[xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU,
Chassis, and chip fan speeds in rotations per minute (RPM). If any of the fans is
not connected to the motherboard, the field shows 0. These items are not user-
configurable.
Vcore.Voltage,.3.3V.Voltage,.5V.Voltage,.12V.Voltage.
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Configuration options: [xxx] [Ignored]
ASUS M2N-VM SE
Phoenix-Award BIOS CMOS Setup Utility
Power

Hardware Monitor

[Disabled]
[60ºC/140ºF]
[60ºC/140ºF]
41ºC/105ºF
31ºC/87ºF
3245 RPM
0 RPM
0 RPM
[1.35V]
[12.12V]
[3.29V]
[5.13V]
[Auto]
[800 RPM]
-/+: Change Value
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
Enter: Select SubMenu
2-33