2.4.6
USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
Advanced
USB Controller
USB Legacy support
USB.Controller.[V1.1+V2.0]
Allows you to disable or set the onchip USB controller.
Configuration options: [Disabled] [V1.1+V2.0] [V1.1]
USB.Legacy.Support.[Enabled]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Configuration options: [Disabled] [Enabled]
2.5
Power menu
The Power menu items allow you to change the settings for the Advanced
Configuration and Power Interface (ACPI) and the Advanced Power Management
(APM). Select an item then press <Enter> to display the configuration options.
Main
Advanced
ACPI Suspend Type
ACPI APIC support
APM Configuration
Hardware Monitor
F1:Help
ESC: Exit
2.5.1.
ACPI.Suspend.Type.[S1&S3]
Allows you to select the Advanced Configuration and Power Interface (ACPI)
state to be used for system suspend. Configuration options: [S1 (POS)] [S3(STR)]
[S1&S3]
2-30
Phoenix-Award BIOS CMOS Setup Utility
USB Configuration
Phoenix-Award BIOS CMOS Setup Utility
Power
Boot
Tools
↑↓ : Select Item
→←: Select Menu
[V1.1+V2.0]
[Enabled]
Exit
[S1&S3]
[Enabled]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Enable or Disable USB 1.1
and 2.0 Controller
Select Menu
Item Specific Help
Select the ACPI state
used for System
F5: Setup Defaults
F10: Save and Exit
Chapter 2: BIOS setup
Suspend.